WATCH THE VIDEO: UNSUPPORTED TILE TAKES MORE THAN 7,500 PSI WITHOUT BREAKING (30 SEC.)

"Our techs and service team love the durability. You can drop heavy parts on the floor and the tile does not break."

- Jim Mueller
Service and Parts Director, Laurel BMW

Cracks and scuffs in a cheap floor are vulnerable places where water, oil, and chemicals can seep under the coating. Cracks deepen and spread, becoming trip hazards. So you patch the cracks and coat the scratches, over and over again. After a while you need to recoat the entire floor. And you realize this cheap floor wasn’t so inexpensive after all.

Or…you pay a reputable installer to put down Argelith tile. The floor holds strong under everything your shop throws at it. Over and over again.

GET A SAMPLE

FEATURES

DURABLE

Long-lifespan industrial floors

Tired of shutting down for a new floor every few years? Vitrified tile is naturally resilient under high-impact use. Tile doesn’t degrade or “wear out.” With proper cleaning and maintenance, your floor will last as long as your facility.

RESILIENT

Harder than steel

Worried about heavy machinery cracking the floor? Vitrification makes ceramic hard, dense, and resistant to cracks or abrasions. Even uninstalled, Argelith’s fully vitrified tiles can withstand tons of pressure. With proper professional installation, they can take whatever your business dishes out.

CHEMICAL RESISTANT

Cool under corrosives

Forget stains and chemical damage on your floor. Ceramic is an inert material that doesn’t react to chemical exposure. Acids, oils, and caustic substances can be cleaned away without damaging the tile. Argelith’s ultra-low absorption rate keeps chemicals and water from seeping through the tile to the slab underneath.

SLIP RESISTANT + EASY TO CLEAN

Safety never looked so good

Keep guests and workers safe with a raised surface profile to provide grip. The deeper the profile, the more slip resistant the tile. Argelith’s surface texture is dimpled, not gritty, so nonslip tiles can still be scrubbed clean. A baked-on easy-to-clean finish keeps dirt from bonding with the tile.

GET A SAMPLE

Sizes:

4¼x5" (hexagon)
4”x8”
8”x8”
12”x12”

Thicknesses:

⅝”
½” (available on 12”x12”)
¾” (not available on 12”x12”)

Surfaces:

R10/R11 Slip Resistant
R12 Security (available on select sizes)
R12/V06 Napped Profile (available on select sizes)
R13 Safety Plus (available on select sizes)

What do these values mean?

Incorporating vivid, permanent safety striping into the design of your ceramic tile floor has never been easier. Forget tape and paint that wear away; Argelith’s Kerasig vitrified tile marks hazards in a clear and lasting way.

Available in ¾” thickness with a slip resistant surface or ⅝” thickness with a slip resistant or napped profile surface.